How to Replace a Saab 9-3 Key
The Saab 9-3 is an excellent car that has a lot of appeal for drivers. It is powerful and has excellent visibility. It also has a high safety rating.
It is essential to have two keys that are compatible for your vehicle. If you lose only one key, it can be costly to purchase another one.
How to Replace the Ignition Key on the Saab 9-3
You must replace your car keys in the event that it isn't turning. This guide will guide you through the steps to do it on a Saab 9-3. You'll need to replace the key, buy another reprogrammable device, and buy a new case for your key-fob.
The most modern Saab models employ a transponder instead of a key made of metal to unlock the car and begin it. G28 Car Keys with this is that the reprogrammable battery in the key-fob can wear out and will not hold a charge anymore. This is particularly applicable if you are using the same key for the lock you have.
The good news is that the battery can be replaced easily by a professional locksmith. You can also do it yourself if you have the proper tools and a bit of patience. The first step is taking the key-fob from its case. Insert an open-ended head into the slot that is in the middle of your case. The plastic is brittle, and can easily be damaged.
When the case is opened and you are able to prepare the new key by combining the lower part of the old key and the transponder and banana on the new key. This will ensure the new key is properly paired to your CIM that can make a significant difference when replacing the sole key of your Saab 9-3.
How to replace the ignition Key on a Saab 900
If you don't have two keys you'll have to remove the steering wheel and dashboard to access the ignition. Start by disconnecting the negative battery cable. Once the battery is disconnected, it is possible to remove the dashboard and trim pieces around the steering wheel. Once the dash is removed, you can insert a screwdriver into the hole at the back of the ignition switch and take it out.
The ignition cylinder is equipped with a key lock that could stop the vehicle from starting if key isn't inside it. If the ignition switch isn't working correctly, make sure to check whether the key is in the lock or stuck inside the barrel. It is also recommended to rotate your keys and keep them clean to avoid being bent.
Saab cars differ from other cars because they don't use traditional metal keys. Instead, the car can recognize the electronic signals generated by the key fob through a special chip in it.
If you lose your only working key fob the dealer will charge you the most expensive dollar to replace the computer module (known as the CIM). However, we can reprogram your existing computer's EEPROM and set it to accept new keys without replacing it. This will save you up to 50% of what the dealer charges! We call it the SAAB Key PROGRAM. Find out more about it here!
How to Replace the Ignition Key in the Saab9-5
The metal part of a traditional Saab key is simple to copy, and is also not much of a deterrent against theft of vehicles. The real protection comes from the electronic part that's in the key fob, which contains a chip which recognizes your car once it's put into the ignition switch.
Saab's anti-theft system has relied upon this technology for more than a decade. It's not as good as an actual lock on the door, but it does make the process of stealing your vehicle more difficult. This is the reason why every Saab owner should keep an extra key on hand.
The majority of new Saabs come with two keys, however they can be added by a dealer using a special handheld device referred to as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is NG 9-3 vehicles, that have more modern, newer features that require keys-fobs.
If you lose all keys and the dealer replaces your CIM or TWICE modules and charge the cost of replacement. But we can reprogram the EEPROM on your computer to accept new keys, and not replace the expensive modules.
How to Replace the Ignition Key on a Saab XC90
It could be time to replace your SAAB key fob if you are having trouble turning the lock barrel. The procedure is fairly simple and doesn't require you to visit a dealer. Instead, you can do it yourself at home, using just a few simple tools.
First, you'll need to prepare the keys for your new car. Before you begin, turn off the anti-theft feature by placing blocks under your rear wheels, and then releasing your handbrake. After that, insert the key into the ignition and turn it to the ON position, which activates the accessories but does not start the engine. Repeat this procedure five times, and then leave the key in the on position.
You'll then have to buy an additional case for your key fob. They can be found at a variety of auto parts stores and are usually very affordable. Depending on the model, you can even buy them without electronic components.
To open up the case, insert a flathead screwdriver inside the slot in the middle. Gently work it. The case should break easily, and once you've done that, you'll have access to the internal electronics. Use a flathead screwdriver to gently pull out the electronics.